Description

Airfill 2 is a high temperature polyester quick setting filler paste that can stand up to 232°C. Airfill 2 is typically used for pattern work, temporary mould repairs, trim and drill tools and assembly fixtures, gel-coat repairs. The thixotropic flow behaviour of Airfill 2 allows an easy application and good coverage.

Benefits

• Ideal for urgent repairs due to short cure time.
• Variable mix options are available.
• Works well on moulds for cures up to 232°C.

Technical data

Material type	Polyester
Colour	Black : Black (A:B)
Mix ratio by weight	100 : 1 (A : B)
Pot life	7-15 minutes (100 g at 22°C)
Mix ratio by weight	100 : 2 (A : B)
Pot life 2	5 minutes (100 g at 22°C)
Maximum use temperature	232°C
Hardness	90 Shore D
Shelf life	12 months from date of shipment when stored in original packaging at 22°C

Sizes

Packaging	Nominal Content Weight Part A (Can)	Nominal Content Weight Part B (Tube)
1 quart kit	1,22 kg (2,70 lbs)	0,0284 kg (1 oz)
1 gallon kit	5,78 kg (12,75 lbs)	0,1136 kg (4 oz)

Application

• Please note that a slight color change at high temperature is normal.
• Ingredients may separate during long term storage, mix thoroughly before use.

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use.

Last updated : 2024-01-03

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.