TMSF 5005A and TMH 5005B is a black silicon-carbide filled surface coat resin designed to be used with our TMR 2001 high temperature epoxy laminating resin and all our infusion resin systems. The resin and hardener are of the low toxicity category, as they do not contain VCHD or MDA. TMSF 5005 is a thixotropic paste that yields a smooth mixed viscosity for easy application and minimum sag on vertical surfaces. TMSF 5005 is extremely hard and will be difficult to sand after cure. Because of the small amount of hardener used with this product, take extra care to ensure a complete and thorough mix.
• High quality pinhole free surfaces achieved without high pressure curing.
• Much longer life achievable with harder tooling surface.
• Easy to apply on large surfaces due to long working time.
| Material type | Silicon-carbide filled surface coat |
| Colour | Black : Amber (A : B) |
| Mix ratio by weight | 100 : 10 (A : B) |
| Tack free time | 8-10 hours (at 72°F or 22°C) |
| Service temperature | 400°F (204°C) |
| Shelf life | 18 months from date of shipment when stored at 72° F (22°C) |
| Packaging Part A | Packaging Part B | Weight Part A
| Weight Part B |
|---|
1 quart | 1/2 pint | 2.75 lbs (1.25 kg)
| 0.31 lbs (0.14 kg)
|
1 gallon | 1 pint | 11 lbs (4.99 kg) | 1.14 lbs (0.52 kg) |
The surface coat should be applied thinly with a cut down brush,
ensuring even coverage and no build up of thickness in corners. Surface
coverage when applied thinly is approximately 30g/ft² (323g/m²).
• Please note that part A resins and part B hardeners are sold
individually by US measurement container size
shown above and are
grouped for proper mix ratio. Volume per container will vary depending
on product
weight shown above. Metric conversions shown for container
size above are for reference purposes only.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2022-02-02
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
