Description

Toolmaster® TB-G48 and Toolmaster® TB-F48 are high temperature solid laminate tooling boards fabricated from high quality woven fabric and epoxy resin. Tooling boards are fabricated with easily removable release ply on each side to provide surfaces suitable for bonding.

Benefits

• Superior laminate quality due to improved manufacturing technology.
• Laminate quality allows defect-free waterjet cutting.
• Novel epoxy chemistry provides outstanding Tg.

Technical data

Material type	Carbon/ Epoxy (TB-G48) or Fiberglass/ Epoxy (TB-F48)
Service temperature	218°C (425°F)
Glass transition temperature by DMA	218°C (425°F)

Sizes

Thickness	Width	Length
1/4 inch (6,35 mm)	4 feet (1,22 m)	8 feet (2,44 m)

• Other sizes available on request. Minimum order may apply to non-stock items.

Application

Uses:
• Lay-up mold back-up structures, stiffening ribs, assembly & bonding fixture, and shop aides.

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2018-10-11

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.