Description

Airtech's Omega Flow Lines are for use under the bag in single or double bag resin infusion applications, replacing spiral wrap polyethylene feeder lines. Omega Flow Lines incorporate an ''Omega section'' internally to transport resin along the surface and into the part. Omega Flow Lines are made from translucent silicone rubber and are reusable.

Four sizes are available with internal diameters of 0.31 in (8 mm), 0.50 in (13 mm), 0.75 in (19 mm) and 1 in (25.4 mm), suitable for use with common size polyethylene tubes. Airtech's Omega Flow Lines leave minimal or no mark off on the part when used in conjunction with Airtech's flow media and peel ply.

Technical data

Material type	Silicone rubber
Colour	Clear
Maximum use temperature	500°F (260°C)

Sizes

Product Reference	Internal Diameter	Length
OF 313	0.31 inch (8 mm)	50 feet (15.2 m)
OF 500	0.50 inch (13 mm)	50 feet (15.2 m)
OF 750	0.75 inch (19 mm)	50 feet (15.2 m)
OF 1000	1 inch (25.4 mm)	50 feet (15.2 m)

Notes

• Omega Flow Lines are reusable with proper care.
• Product is recommended to be treated with compatible release to maximize lifespan.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2021-04-13

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.