Description

Dahlvac MB80 & RC Vacuum Hose are easy to use vacuum sources designed for resin infusion. The internal spiral tube provides good vacuum flow and the outer layer of Dahltexx® SP-2 allows breathability while preventing resin from entering the vacuum channel.

Dahlvac MB80 can easily be attached to the periphery of a mould using Airtac spray adhesives or Airhold 10 CBS double backed tape.

Benefits

• Easy to use and simplifies the infusion process.

• Highly breathable while preventing resin from entering the vacuum source.

• Aids in uniform resin distribution.

Technical data

	Dahlvac MB80	Dahlvac RC Vacuum Hose
Material type	Dahltexx® SP-2 fabric with PE Spiral Wrap	Dahltexx® SP-2 fabric with PE Spiral Wrap
Colour	Blue	Blue
Maximum recommended use temperature	121°C (250°F)	121°C (250°F)

Sizes

Product reference	Width	Length
Dahlvac MB80	5.08 cm (2.0 inches)	30.48 m (100 feet)
Dahlvac RC Vacuum Hose	1.27 cm (0.5 inches)	30.48 m (100 feet)

Notes

• Other sizes available on request. Minimum order required.

• The maximum use temperature is dependent upon the duration at maximum temperature and is
process specific Airtech recommends testing prior to use.

Last updated : 2024-05-02

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.