Airtac 2 LH+ is a high tack spray adhesive designed for temporary bonding. Airtac 2 LH+ can be used to hold dry materials on contours and vertical surfaces. This product is ideally suited to resin infusion applications for holding plies, release films, peel plies, and infusion mesh in place until the vacuum bag is secured. Airtac 2 LH+ has a fine mist spray pattern.
• Low hazard, fine mist adhesive.
• Excellent tack for faster vacuum bagging.
• More accurate material placement for infusion and better laminate quality.
| Characteristics | Methylene chloride free, toluene free |
| Shelf life | 12 months from date of shipment when stored between 15 - 35°C |
| Packaging Type | Content |
|---|
| 12 cans per case | 500 ml
|
• Product can be applied to one or to both bonding surfaces. Ensure surfaces are clean and free of
FOD, grease, oil, wax, etc. For best results surfaces should be between 10 – 30°C.
• Use with adequate ventilation. Shake aerosol well before use. Read SDS information and
understand before use.
• Spray 20 – 25 cm away from the surface at 90° to the surface, applying an even coat.
Allow the adhesive to tack off until there is no transfer when touched.
• Join surface and press firmly together.
• After use to prevent clogging of the nozzle, hold the can upside down and spray until no more
adhesive leaves the nozzle.
• Consult SDS prior to use. Do not store at temperatures over 50°C or below 5°C. Avoid exposure to sunlight.
Do not store directly on concrete floor.
• Air Trigger sold separately.
Last updated : 2023-06-28
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
