Description

The Airtech high temperature resin infusion connector (RIC HT) provides inexpensive and efficient through bag connection for vacuum manifold and resin feed lines for high temperature resin infusion applications.

Benefits

• Saves time connecting poly tubing to vacuum bags for resin feed and vacuum lines.
• Infuse and cure successfully at elevated temperature with Nylon fitting.
• Avoid quality problems due to vacuum bag leakage at pipe connections.

Technical data

Material type	Nylon
Maximum use temperature	180°C
Colour	Black

Sizes

Product reference	Tube connection	Spiral tube connection
RIC HT 12	13 mm (1/2 inch)	13 mm (1/2 inch)
RIC HT 58	16 mm (5/8 inch)	16 mm (5/8 inch)
RIC HT 34	19 mm (3/4 inch)	19 mm (3/4 inch)

Notes

• Select RIC HT to fit with tube and spiral employed and position as desired, then complete vacuum bag.
• Cut the Airtech nylon tube on angle and apply wrap of vacuum sealant tape above cut.
• Smooth bag film over RIC HT and pierce film with angled tube until vacuum sealant seals connection.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2022-05-30

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.