Description

Knitflow knitted infusion mesh assist the flow of resin through the vacuum bag and into the part during the vacuum assisted resin infusion process. These flow mesh work well with polyester, vinyl ester and epoxy resins. These knitted mesh are highly drapable and can be selected based on preferred speed of flow.

Technical data

	Knitflow 110	Knitflow 150	Knitflow 160
Material type	HDPE	HDPE	HDPE
Colour	Black	Blue	Orange
Configuration of net	Knitted	Knitted	Knitted
Maximum use temperature	115°C	115°C	115°C
Mesh weight	100 g/m²	150 g/m²	160 g/m²
Nominal thickness	1.00 mm	1.3 mm	1.5 mm
Resin flow speed	Slower flow	Medium flow	Faster flow

Shelf life	Unlimited when stored in original packaging at 22°C

Sizes

	Knitflow 110	Knitflow 150	Knitflow 160
Roll Size	1.5 m x 100 m	1.5 m x 100 m 2.0 m x 100 m	1.5 m x 100 m

Notes

• Other sizes available upon request.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2023-03-15

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.