Description

The PVC Tube is used to transport the resin during an infusion process. The PVC Tube is designed with adequate wall thickness and a reinforcement to prevent collapse under vacuum. The reinforcement can be a fibre braid or a plastic spiral which are embedded in the wall of the tube.

Benefits

• Transparent tube wall for good visibility of resin flow.
• Good flexibility.
• Reinforcement for increased tube strength.

Technical data

Material type	PVC
Colour	Clear
Service temperature	60°C

Sizes

Product Reference	Reinforcement	Internal Diameter (ID)	Outer Diameter (OD)	Length	Fit with
PVCFRTUBE1016100	Fibre Braid	10 mm	16 mm	100 m	12 mm fittings
PVCFRTUBE1319100	Fibre Braid	13 mm	19 mm	100 m	16 mm fittings
PVCSPTUBE162150	PVC Spiral	16 mm	21 mm*	50 m	18 mm fittings
PVCSPTUBE192450	PVC Spiral	19 mm	24 mm*	50 m	20 mm fittings

*Indicative value.

Notes

• Other sizes available upon request.
• Infusion Valves are available for stopping the resin or vacuum.
• See separate technical data sheet for compatible fittings.

Last updated : 2023-06-28

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.