Description

The resin infusion starter kit is made for beginners in the resin infusion technology. All necessary materials are included, excluding a vacuum pump. The resin infusion starter kit will enable you to make your first composite part using the resin infusion technology in a short period of time. The provided material will allow you to make a part superior to 2 sqm.

Please visit the Media Center on www.airtech.com for working instructions and details.

Item	Product name	Description	Quantity
1	Non Aerospace catalogue	Catalogue	1
2	RB 451	Vacuum reservoir	1
3	1/2" Polyethylene tubing	Tubing	25 m
4	1/2" Polyethylene spiral tubing	Spiral tubing	25 m
5	OF 625V	Resin infusion line	2.5 m
6	NTF-38	3/8" x 3/8" x 3/8" Nylon barb "T" fittings	10
7	NEF-38	3/8" x 3/8" x 3/8" Nylon barb elbow fittings	10
8	Greenflow 75	Resin distribution medium	1.04 m x 6 m
9	Tac-Strip	Adhesive coated fibreglass tape	1 roll
10	WL 5400	Vacuum bagging film	50 µm x 1.52 m x 6 m
11	Bleeder Lease® B	Release coated peel ply	1.52 m x 4.5 m
12	AT-200Y	Vacuum bag sealant tape	6 rolls
13	Econobreaker 2R	1" wide hold down tape	1 roll
14	Airhold 10 CBS	1" wide double back tape	1 roll
15	Resin Line Clamps	Resin feed line clamp	3
16	RIC12	1/2" resin infusion connector	1
17	10 litre pail	Resin reservoir	1

Last updated : 2024-04-19

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.