Description

Vac-Brake Pro is a combination vacuum manifold and resin brake for the periphery of resin infusion moldings. Vac-Brake Pro features a spiral tube sewn into a Dahltexx sleeve then assembled into a PP200 resin brake. Positioned around the edge of the part it distributes even vacuum and provides a resin brake preventing resin waste and choking of the vacuum manifold.

Benefits

• Simplify infusion setup, saving time and avoiding errors.
• Reduce resin waste in manifolds and catch pots.
• Avoid lost vacuum slowing infusion progress.

Technical data

Material type	PP Textile and PE Spiral tube
Maximum use temperature	250°F (121°C)
Shelf life	Unlimited when stored in original packaging at 72°F (22°C)

Sizes

Product Reference	Width	Length	Packing
Vac-Brake Pro	4 inches (10.2 cm)	82 feet (25 m)	1 roll

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
• For best results remove Vac-Brake Pro while the laminate is still "green" or within 24 hours.

Last updated : 2023-06-28

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.