Description

Flowstrip PP4 is a lay flat resin feed channel constructed with a high speed 3D mesh inside a highly porous non-woven polypropylene sleeve. Flowstrip PP4 is an extremely efficient resin flow channel which is easy to position on infusion laminates and vacuum bag. Flowstrip PP4 have a self releasing polypropylene sleeve and can be removed from cured laminates.

Benefits

• Good resin flow speeds for reduced infusion cost.
• Can be peeled off cured laminates.
• Lays flat for easy vacuum bagging and simple to connect to with Airtech infusion connectors.

Technical data

Material type	0.18 inch (3.5 mm) nylon mesh in polypropylene sleeve
Colour	White
Maximum use temperature	311°F (155°C)
Materials to avoid	Compatible with most resins
Shelf life	Unlimited when stored in original packaging at 72°F (22°C)

Sizes

Product	Width	Length
Flowstrip PP4	4 inches (10 cm)	54 yards (50 m)

Notes

• Minimum order quantity is 1 roll.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2023-06-28

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.