PP200 is a thin non-woven release ply that has been heat set on one side. PP200 can be used with
infusion processing for general composite applications such as marine. The micro porous properties
all the resin to easily pass through the material during the infusion process. PP200 can be removed
after cure to leave a textured surface that aids preparation for painting and bonding.
• Leaves a textured surface on the laminate to save time preparing surfaces.
• Good flexibility for easy positioning over shaped parts.
• Can be easily tailored to shape and positioned for faster setup times.
| Product | PP150 | PP200 |
| Fibre type | Polypropylene | Polypropylene |
| Colour | White | White |
| Nominal weight | 150 g/m² (4.4 oz/yd²) | 200 g/m² (5.9 oz/yd²) |
| Maximum use temperature | 140°C (285°F) | 140°C (285°F) |
| Shelf life | Unlimited when stored in original packaging at 22°C (72°F) |
| Product | Width | Length | Packaging |
|---|
| PP150 | 1.52 m (60 inches) | 50 m (55 yards) | 1 roll |
| PP200 | 1.52 m (60 inches) | 50 m (55 yards) | 1 roll |
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
• The gloss side of the product should be placed against the part surface for release after cure.
Last updated : 2024-03-12
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
