Description

Flowstrip is a lay flat resin feed channel constructed with a high speed 3D mesh inside a highly porous non-woven polyester sleeve. Flowstrip is an extremely efficient resin flow channel which is easy to position on infusion laminates and vacuum bag.

Benefits

• Good resin flow speeds for reduced infusion cost.
• Easily stored, unrolled, cut and positioned in the mould for faster builds.
• Lays flat for easy vacuum bagging and simple to connect to with Airtech infusion connectors.

Technical data

Material type	PP mesh in polyester sleeve
Colour	Grey
Maximum use temperature	155°C (311°F)
Materials to avoid	Compatible with most resin systems
Shelf life	Unlimited when stored in original packaging at 22°C (72°F)

Sizes

Product	Width	Length
Flowstrip 4"	10 cm (4 inches)	100 m (110 yards)

Notes

• The maximum use temperature is process dependent, Airtech recommends testing prior to use.
• Flowstrip is not self-releasing and should be used in conjunction with a perforated release film or
peel ply if removal is required after cure.

Last updated : 2025-04-21

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.