Description

Tac-Strip HT is a premium version of the Tac-Strip adhesive mesh designed
for holding dry fabrics in place as required when using resin infusion,
resin transfer molding, and other processes using dry fabrics. Tac-Strip
HT is a fiberglass mesh tape coated on both sides with an acrylic
adhesive, which is cleaner to use than a spray adhesive.

Benefits

• Improved adhesive provides firmer hold in less time spent while placing dry materials in infusion setups.
• Cleaner application than spray adhesives, reducing clean up time around the mold.
• No solvent exposure and associated requirement for safety measure.

Technical data

Material type	Fiberglass mesh
Adhesive type	Acrylic
Colour	White
Maximum use temperature	212°F (100°C)
Shelf life	12 months from date of shipment when stored in original packaging at 72 °F (22 °C)

Sizes

Thickness	Width	Length	Packaging
0.008 inch (0.2 mm)	1 inch (2.54 cm)	295 feet (90 m)	1 roll
0.008 inch (0.2 mm)	2 inches (5.08 cm)	295 feet (90 m)	1 roll

Notes

• Tac-Strip HT is an environmental friendly product which can be used instead of spray adhesives.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2024-08-13

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.