Description

Resin distribution medium for elevated temperatures. Resinflow 90 HT is designed for resin infusion with cures at 350 °F (177 °C). The fused overlay construction provides optimum flow characteristics.

Technical data

Material type	Nylon
Colour	Clear
Configuration of net	Extruded (Rhombic)
Maximum use temperature	350 °F (177 °C)
Melt point	425 °F (218 °C)
Shelf life	Unlimited when stored in original packaging at 72°F (22°C)

Sizes

Thickness	Width	Length
0.035 in (0.9 mm)	40 in (1.01 m)	500 ft (152 m)

Notes

• This product is an extruded mesh and does not fray when cut.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2021-01-22

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.