Perforation
Style | Nominal Hole
Diameter | Description
Inches | Description
mm
| Maximum
Width |
|---|
| P | 1,143 mm
(0,045 inch)
| Staggered
0,25 inch center | Staggered
6,3 mm center | 182,9 cm
(72 inches)
|
| P1 | 1,143 mm
(0,045 inch) | Staggered
0,25 inch
0,50 inch | Staggered
6,3 mm
12,7 mm | 182,9 cm
(72 inches) |
| P3* | 0,381 mm
(0,015 inch) | Staggered
0,25 inch center | Staggered
6,3 mm center | 182,9 cm
(72 inches)
|
| P4 | 1,143 mm
(0,045 inch)
| 2 inches center | 50,8 mm center | 182,9 cm
(72 inches)
|
| P5 | 1,143 mm
(0,045 inch)
| 3,5 inches center | 88,9 mm center | 182,9 cm
(72 inches) |
| P6* | 0,381 mm
(0,015 inch)
| 2 inches center | 50,8 mm center | 162,6 cm
(64 inches)
|
| P7* | 0,381 mm
(0,015 inch)
| 3 inches center | 76,2 mm center
| 162,6 cm
(64 inches)
|
| P8* | 0,381 mm
(0,015 inch)
| 8 inches center | 203,2 mm center | 162,6 cm
(64 inches)
|
| P10 | 1,143 mm
(0,045 inch)
| 10 inches center | 254,0 mm center | 182,9 cm
(72 inches)
|
| P11* | 0,381 mm
(0,015 inch)
| 0,25 inch center | 6,3 mm center | 182,9 cm
(72 inches)
|
| P16* | 0,406 mm
(0,016 inch)
| Staggered
0,118 inch center
| Staggered
3,0 mm center | 182,9 cm
(72 inches)
|
| P31* | 0,381 mm
(0,015 inch)
| 1 inch center | 25,4 mm center | 162,6 cm
(64 inches)
|
| P34 | 1,143 mm
(0,045 inch)
| Staggered
0,50 inch center | Staggered
12,7 mm center | 182,9 cm
(72 inches)
|
| MP22* | 0,406 mm
(0,016 inch)
| Staggered
0,059 inch center
| Staggered
1,5 mm center | 182,9 cm
(72 inches)
|
| MP25 | 0,127 mm
(0,005 inch)
| Staggered
0,040 inch
0,079 inch
| Staggered
1,0 mm
2,0 mm
| 72 inches
(182.9 cm) |
*Nominal Hole Diameter for Wrightlon® 5200 and A4000 are 0,279 mm (0,0110 inch).
• Spacing is approximate.
• Various perforation methods can be utilized including and not limited to die stamping, laser, hot pin roller,
needle punching, and pinwheel. The nominal dimensions quoted above may vary due to style of perforation,
film type perforated, and film thickness. Testing should be done to ensure the material in the perforation
style you have chosen will work for your individual application.
• Minimums are required for some perforation patterns when not in stock.
Last updated : 2025-03-14
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
