Description

80A is a high temperature nylon peel ply. Release ply fabrics are peel plies, used to texture the surface of a composite laminate. The peel ply surface is helpful for secondary bonding or painting of the composite laminate. Release ply fabrics may reduce or eliminate the need for sanding or abrading. The fabric is scoured and heat set to remove most contaminates and reduce shrinkage.

Benefits

• Peel plies strip off of cured laminates leaving a textured surface, reducing time spent hand finishing.
• Less time abrading in preparation for secondary bonding or painting.
• Drapable weave style can be applied over shaped parts easily.

Technical data

Maximum use temperature	205°C
Fibre type	Nylon
Weight	80 g/m²
Colour	White
Shelf life	Unlimited when stored in original packaging at 22°C

Sizes

Width	Length	Packaging
1.52 m	200 m	1 roll

Sustainability

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
• Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.
• Not recommended for use against phenolic resins.

Last updated : 2025-02-25

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.