Ultraweave® 2032 is made from nylon which has a higher softening point than polyester. The result is Ultraweave® nylon breathers maintain loft and the ability to breath under high pressure and temperatures.
Ultraweave® 2032 is the most reliable heavy duty breather made for high temperature and pressure autoclave cures. When slit, it can be used as an edge durable breather. This product eliminates the need for multiple layers of polyester breather.
| Fiber type | Nylon 6,6 |
| Colour | White |
| Weight (approx.) | 20 oz/yd² (632 g/m²) |
| Maximum use temperature | 450°F (232°C) |
| Fire retardant | Yes |
Shelf life
| Unlimited when stored in original packaging at 72°F (22°C) |
| Width | Length | Packaging |
|---|
| 60 inch (152 cm) | 25 yards (23 m) | 1 roll |
• Maximum use temperature is dependent upon the duration at maximum temperature and is process
specific. Airtech recommends testing prior to use.
• Material can be slit in special widths upon request (1 roll as minimum order quantity).
• Other roll lengths are available upon request.
• Packaging is clear with red print.
This product is for developmental purposes only. Product is in introductory phase and technical data
parameters have not been fully established. Airtech makes no warranties and assumes no
responsibilities for the information contained herein.
Last updated : 2017-09-01
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
