Description

Econolease is a silicone treated nylon peel ply which provides greater release in difficult environments.

Our Econo peel plies are designed to work in resin infusion or hand lay-up processes. All coated peel plies have the potential to transfer.

Benefits

• Lower cost fabric reduces overall cost of vacuum bag process materials.
• Release coating reduces the effort required to remove peel ply from laminate.
• Peel plies strip off cured laminates leaving a fine textured surface, reducing time spent hand finishing.

Technical data

Maximum use temperature	204°C (400°F)
Fiber type	Nylon
Weight	61 g/m² (1.8 oz/yd²)
Thickness	0.101 mm (0.004 inch)
Colour	Light blue
Coating type	Silicone
Storage	Recommended storage temperature is 5°C to 40°C (41°F to 104°F). Store indoors in original packaging, do not stack rolls on end.

Sizes

Width	Length	Packaging
152 cm (60 inch)	91 m (100 yards)	1 roll

Sustainability

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
• Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.
• Certain phenolic resins will adhere to this product. Airtech recommends testing prior to use.

Last updated : 2025-04-05

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.