Release Ease® 234 TFNP & Release Ease® 236 TFNP are non-porous PTFE coated glass fabric which will provide release from all conventional resin systems. These are non-porous products which contain resin. Release Ease® products have a continuous service temperature to 288°C (550°F). Release Ease® 236 TFNP is a non-porous glass fabric with increased thickness and PTFE content to reduce fabric mark-off.
• Non-porous hard wearing release sheet for moulding flat and simple shaped parts.
• Can be used multiple times to help reduce consumable usage and time spent cutting materials.
• Provides a smooth high gloss finish on moulded parts, reducing time spent hand finishing.
| Release Ease® 234 TFNP | Release Ease® 236 TFNP |
| Maximum use temperature | 288°C (550°F) | 288°C (550°F) |
| Fibre type | Fibreglass | Fibreglass |
| Coating type | PTFE | PTFE |
| Thickness | 0.075 mm (0.003 inch) | 0.152 mm (0.006 inch) |
| Colour | Brown | Brown |
| Storage | Recommended storage temperature is 5°C to 40°C (41°F to 104°F).
Store indoors in original packaging, do not stack rolls on end. |
| | Width | Length | Packaging |
|---|
| Release Ease® 234 TFNP | 97 cm (38 inches) | 91 m (100 yards) | 1 roll |
| | 127 cm (50 inches) | 91 m (100 yards) | 1 roll |
| | 152 cm (60 inches) | 91 m (100 yards) | 1 roll |
| Release Ease® 236 TFNP | 97 cm (38 inches) | 91 m (100 yards) | 1 roll |
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
• Colour is subject to slight variation and does not affect performance.
• Hot knife (sealed edge) slitting upon request with 1 roll minimum order quantity.
• Release 236 TFNP may be treated to accept printing for special applications.
Consult your Airtech representative for specific applications.
Last updated : 2025-03-26
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
