Description

Bleeder Lease® A & Bleeder Lease® B peel plies are high temperature nylon fabrics coated with a silicone release agent. It provides superior release to plain peel plies because the coating prevents the fabric from bonding to the laminate while producing a textured surface. It will provide easy release from most prepregs and resin systems. All coated peel plies have the potential to transfer. Bleeder Lease® A is a highly drapable open weave peel ply, Bleeder Lease® B is a tightly woven peel ply. Bleeder Lease® A & Bleeder Lease® B release well from most resin systems.

Benefits

• Release coating reduces the effort required to remove peel ply from laminate.

• Peel plies strip off of cures laminates leaving a textured surface, reducing time spent hand finishing.

• Highly drapable weave style can be applied over compound contours more easily.

Technical data

	Bleeder Lease® A	Bleeder Lease® B
Maximum use temperature	232°C (450°F)	232°C (450°F)
Fibre type	Nylon	Nylon
Fabric construction:	158 x 158 ends/ dm x picks/ dm (40 x 40 ends/in x picks/in)	409 x 342 ends/ dm x picks/ dm (104 x 87 ends/in x picks/in)
Weight	80 g/m² (2.34 oz/yd²)	62 g/m² (1.83 oz/yd²)
Thickness	0.152 mm (0.006 inch)	0.114 mm (0.0045 inch)
Colour	Green	Green
Coating type	Silicone	Silicone
Storage	Recommended storage temperature is 5°C to 40°C (41°F to 104°F). Store indoors in original packaging, do not stack rolls on end.

Sizes

	Width	Length	Packaging
Bleeder Lease® A	152 cm (60 inches)	91 m (100 yards)	1 roll
Bleeder Lease® B	152 cm (60 inches)	91 m (100 yards)	1 roll

Sustainability

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process

specific, Airtech recommends testing prior to use.

• Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.

• Certain phenolic resins will adhere to this product. Airtech recommends testing prior to use.

Last updated : 2025-03-26

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.