80AR peel ply is a high temperature nylon fabric coated with a silicone release agent. It provides superior release to plain peel plies because the coating prevents the fabric from bonding to the laminate while producing a textured surface. It will provide easy release from most prepregs and resin systems. All coated peel plies have the potential to transfer release agent to the part so we recommend testing prior to part production.
• Release coating reduces the effort required to remove peel ply from laminate.
• Peel plies strip off of cured laminates leaving a textured surface, reducing time spent hand finishing.
• Highly drapable weave style can be applied over compound contours more easily.
Maximum use temperature | 205°C |
Fibre type | Nylon |
Weight | 80 g/m² |
Colour | Orange |
Coating type | Silicone |
Shelf life | 24 months from date of shipment when stored in original packaging at 22°C |
Width | Length | Packaging |
---|
1.52 m | 100 m | 1 roll |
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
• Phenolic resin may cause release problems with 80AR, therefore it is recommended tests should be
carried out before use.
• Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.
Last updated : 2025-02-25
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.