Description

Corehold P-HA is a core holding film designed to hold honeycomb core and other core materials during machining. It is a polyester film coated on one side with a silicone free synthetic rubber adhesive. The film is supplied with a yellow backing release paper on one side. Corehold P-HA provides a very high peel adhesion and is ideal for strong fixation and machining of core when a vacuum table is utilized. It works well on contoured applications and has very high adhesion properties while leaving very little residue.

Benefits

• Super strong tape can be used for fixing material position during machine processes.
• No movement of cores during machining on vacuum chucks, helps improve part quality and avoid process
errors.
• Silicone free rubber based adhesive, making removal and clean up easier after use.

Technical data

Carrier type	Polyester
Adhesive type	Rubber
Colour	Clear
Total thickness	165 µm
Film thickness	35 µm
Adhesive thickness	130 µm
Adhesion 180° peel	55 N/25 mm
Elongation at break	180 %
Shelf life	18 months from date of shipment when stored in original packaging at 22°C

Sizes

Width	Length	Packaging
150 cm	50 m	1 master roll

Sustainability

Notes

• Other sizes available upon request.

Last updated : 2025-02-07

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.