Description

Flashbreaker® 2R (HT) is a polyester pressure sensitive tape coated with a high tack, non-silicone adhesive. This tape holds down vacuum bagging materials and thermocouple wires on metal or composite parts and tooling. Flashbreaker® 2R (HT) is a superior tape for holding down non-woven breather materials.

Flashbreaker® 2R (HT) has high temperature capabilities, making it a good choice for oven or autoclave cures to 400°F (204°C).

Benefits

• Rubber adhesive tape can be used where silicone adhesives are prohibited to reduce contamination risk.
• Higher tack rubber adhesive holds materials in place quicker, better, and faster.
• Flashbreaker® 2R (HT) can remove heavier flash build up, reducing difficult clean-up effort.

Technical data

Maximum use temperature	204°C (400°F)
Carrier type	Polyester
Adhesive type	High tack rubber
Colour	Red
Total thickness	0.0037 inch (93 µm)
Film thickness	0.002 inch (50 µm)
Adhesive thickness	0.0017 inch (43 µm)
Elongation at break	100 %
Shelf life	18 months from date of shipment when stored in original packaging at 22°C (72°F)

Commonly Used Sizes

Width	Length	Packaging
1 inch (2.54 cm)	72 yards (66 m)	48 rolls per case
2 inches (5.08 cm)	72 yards (66 m)	24 rolls per case

• Broken cases and other widths available on special order.

Sustainability

Notes

• Available with removable liner.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, Airtech recommends testing prior to use.

Last updated : 2025-02-07

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.