Description

Toolwright 3R is an extruded fluoropolymer film coated with rubber pressure sensitive adhesive. The orange colour is highly visible on most substrates in addition to offering high elongation and tensile strength.

Benefits

• No potential for silicone contamination.

• Provides excellent release from all common resin systems for multiple releases.
• Good adhesion to metal, composite, Tooling block and rubber tooling.
• High elongation allows for easier covering of complex contour surfaces.
• Tougher film is more tear resistant and so it’s easier to stretch over complex shapes without damage.

Technical data

Maximum use temperature	204°C (400°F)
Carrier type	Extruded fluoropolymer
Adhesive type	Rubber
Colour	Light orange substrate / white adhesive
Total thickness	0.003 inch (75 µm)
Film thickness	0.002 inch (50 µm)
Adhesive thickness	0.001 inch (25 µm)
Elongation at break	350 %
Shelf life	18 months from date of shipment when stored in original packaging at 22°C (72°F)

Commonly Used Sizes

Width	Length
50 inches (127 cm)	18 yards (16.5 m)

• Other widths available, please contact Airtech for more information.

Sustainability

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process,
specific, Airtech recommends testing prior to use.

Last updated : 2025-02-10

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.