Description

Durocast table tops are manufactured using the highest grade urethane available. The cutting surfaces always provide a smooth, non-contaminated working surface. Our standard size, colour and gauge table tops can be certified to be silicone free. We recommend our Airhold 10 CBS for holding Durocast to the table.

Benefits

• Silicone Free
• Smooth, uniform, and flat surface
• May be cut to custom sizes at Airtech

Technical data

Material type	Polyurethane
Colour	Blue
Hardness	90 +/- 4 Shore A
Standard gauge	.245 +/- .010 inch (6.22 mm +/- .25 mm)
Tolerance	+/- 1/2 inch (+/- 13 mm) length; +/- 1/4 inch (+/- 6 mm) in width

Sizes

Thickness	Width	Length
0.245 inch (6.22 mm)	3 feet (0.91 m)	6 feet (1.83 m)
0.245 inch (6.22 mm)	4 feet (1.22 m)	8 feet (2.44 m)

Notes

• Custom sizes, durometers and colours available on special order.
• 4', 5', and 6' widths are available and can be cut to any length. Contact Airtech for availability and pricing.
• Table tops are shipped in a coil held by pressure sensitive tape. Table tops should not be cleaned with MEK.
They can be cleaned with mild detergent wash.
• May be marked "silicone free" upon request prior to shipping.

Last updated : 2022-02-05

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.