CEP G3, CEP G12, CEP F7500, CEP F7544
Service temperature
| Initial cure temperature
| Resin type
| Shelf Life at 72°F (22°C)
| Fabric styles
|
|---|
450°F (232°C) | 355°F (alternative 250°F)
or 180°C (alternative 120°C) | Cynate epoxy
| 20 days
| Carbon 3K twill & 12K twill
Fiberglass 7500 & 7544
|
Benefits• Excellent high temperature properties (High Tg. 500°F or 260°C) for long tool life & reduced tooling cost.
• Lower temperature cure than BMI reduces dimensional deviation due to thermal expansion.
• Excellent tack level for fast ply lay-up and ease of processing for reduced labor cost.
Beta G3, Beta G6, Beta G12
Service temperature | Initial cure temperature | Resin type | Shelf Life at 72°F (22°C) | Fabric styles |
|---|
425°F (218°C) | 355°F (180°C) | Benzoxazine | 6 months
| Carbon 3K twill, 6K twill, & 12K twill
|
Benefits
• Outstanding toughness and high Tg.(485°F or 251°C) ensures long term tool life & reduced life cycle cost.
• Exceptionally low shrinkage for low residual stresses, low spring back & excellent post machining.
• Exceptionally long out-life for greatly increased work flexibility, good tack for ease of laminating.
Service Temperature
| Initial Cure Temperature
| Resin Type
| Shelf Life at 77°F (25°C) | Fabric Styles |
|---|
425°F (218°C) | 355°F (180°C) | Benzoxazine | 6 months
| Carbon 24K triaxial |
Benefits
• Discontinuous sheets reduce layup effort and improve conformability.
• Quasi-isotropic within each ply, providing simpler and faster layup.
• Will produce consistent laminate thickness for even heat-up and meeting design targets.
TMFP3100, TMFP3200, TMGP4000, TMGP4100, TMGP4200
Service temperature | Initial cure temperature | Resin type | Shelf Life at 72°F (22°C) | Fabric styles |
|---|
400°F (204°C) | 250°F (120°C) | Epoxy | 40 days | Carbon 3K plain, 6K twill & 12K twill
Fiberglass 7500 & 7544 |
Benefits
• Toolmaster® composite molds are lighter weight than metal tools for easier manual handling.
• Lower thermal mass than metal tools allows faster heat up, shorter cures & greater productivity.
• Toolmaster’s low volatile content & excellent adhesion enables Airpad rubber caul reinforcement.
LTC-F5500, LTC-F5600, LTC-G1400, LTC-G1600
Service temperature | Initial cure temperature | Resin type | Shelf Life at 72°F (22°C) | Fabric styles |
|---|
355°F (180°C) | 140°F (60°C) | Epoxy | 5-7 days | Carbon 3K twill & 12K twill
Fiberglass 7500 & 7544 |
Benefits
• Low initial cure temperature allows use of lower temperature master model materials.
• Dimensional deviation due to thermal expansion is minimized for more accurate molds.
• Good tack level & cut piece supply for fast ply lay-up and reduced manufacturing labor cost.
Last updated : 2018-08-11
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
