The diamond embossed film is an inexpensive, general purpose protective film for use with prepreg materials. The diamond embossed film can be used to protect prepreg layups on the mould tool and to separate prepreg layers on the ply cutter during kitting.
| | Test method |
| Material type | Polyethylene | |
Elongation at break (*b.e)
| 400 % | ASTM D 882 |
Tensile strength (*b.e)
| 12 MPa | ASTM D 882 |
| Maximum use temperature | 90°C | |
| Flammability (self extinguishing) | No | ATP-5034 |
| Materials to avoid | Phenolic resins/Strong oxidizers | |
| Colour | Red / Blue | |
Shelf life
| Unlimited when stored in original packaging at 22°C
| |
Thickness (*b.e)
| Width | Length | Weight / Roll | Forms Available* |
|---|
| 100 µm (0,004 inch) | 1,47 m (58 inches) | 914 m (3000 feet) | 126 kg | SHT |
• Maximum use temperature is dependant upon the duration at maximum temperature and is process
specific. Airtech recommends testing prior to use.
• Slitting to narrow width upon request with 1 master roll as minimum order quantity.
• Other colours available upon request.
(*b.e) = before embossing
* SHT = sheeting, CF = centerfold, LFT = lay-flat tubing, LFT-G = lay-flat tubing gusseted.
Last updated : 2022-01-24
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
