A2750 is four plies of heavy duty fiberglass sewn together with fiberglass thread. This product provides an air channel and will not compact at pressures up to 200 psi (14 bars) and temperatures up to 900°F (482°C). A2750 has enough mass to absorb excess resin and allow venting during an extended cure cycle. An edge bleeder and breather must function throughout the cure or there will be porosity (entrapped gas) in the laminate.
| Thickness | Width | Length | Remarks |
|---|---|---|---|
| 0.035 inch (0.09 mm) | 3 inches (7.62 cm) | 25 yards (22.9 m) | 4 plies |
• Other sizes and ply layers available on request.
Last updated : 2017-11-03
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
Enter your email to view the product detail
About
We are professional and reliable provider since we offer customers the most powerful and beautiful themes. Besides, we always catch the latest technology and adapt to follow world’s new trends to deliver the best themes to the market.
Featured Posts
Contact info
Address: 5700 Skylab Road,
Huntington Beach, CA 92647
United StatesPhone: +1 714 899 8100
Email:
