Description

Airweave® A is a ''waffle'' pattern bleeder used for resin absorption in high flow, wet lay-up applications. It can be used as a breather for compaction or debulk application.

Benefits

• Easy to use bleeder for resin bleed out applications.
• More even resin bleed out than fiberglass bleeders.
• Easy to use as breather for compactions and debulks.

Technical data

Fiber type	Synthetic
Colour	White
Weight (approx.)	54 g/m² (1.6 oz/yd²)
Maximum use temperature	204°C (400°F)
Storage	Recommended Storage temperature is 5°C to 40°C (41°F to 104°F). Store original packaging, do not stack rolls on end.

Sizes

Width	Length	Packaging
147 cm (58 inches)	229 m (250 yards)	1 roll

Notes

• Material can be slit in special widths upon request (1 standard roll as minimum order quantity).
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2025-03-30

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.