All Ultraweave® products have a higher temperature softening point and will not compress like polyester allowing for increased airflow.
Ultraweave® 1020 was developed for cure temperatures up to 232°C. Designed for all resin systems. Ultraweave® 1020 will stop back pressures in autoclave lay-ups and eliminates porosity in the laminate due to seal off. Ultraweave® 1020 is capable of multiple cycles.
• High temperature nylon fibre prevents vacuum lock-off inside vacuum bags.
• Maintains higher vacuum levels for better part quality.
• Better airflow performance reduced trapped volatiles and improves part quality.
| Fibre type | Nylon 6,6 |
| Colour | White |
| Weight (approx.) | 339 g/m² |
| Maximum use temperature | 232°C |
Fire retardant
| Yes
|
| Shelf life | Unlimited when stored in original packaging at 22°C |
| Width | Length | Packaging |
|---|
152 cm (60 inches)
| 50 m (55 yards)
| 1 roll |
• Material can be slit in special widths upon request (1 master roll as minimum order quantity).
• Maximum use temperature is dependent upon the duration at maximum temperature and is process
specific. Airtech recommends testing prior to use.
Last updated : 2018-09-20
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
