Description

Flashbreaker® 1 (HT) tape is used for heavy duty hold down applications where a high level of adhesion is required.

Flashbreaker® (HT) tapes are a high temperature polyester film coated with a high tack silicone adhesive for oven or autoclave to 400°F (204°C). These are ideal for holding down heavier non-woven breather materials.

Benefits

• Higher tack adhesive holds difficult materials in place more securely, easier, and quicker.
• Flashbreaker® 1 (HT) tapes make removal of resin flash easier, reducing cleaning time.
• Fix position of consumable materials to avoid process errors and improve part quality.

Technical data

Maximum use temperature	400°F (204°C)
Carrier type	Polyester
Adhesive type	High tack silicone
Colour	Yellow
Total thickness	0.0035 inch (90 µm)
Film thickness	0.001 inch (25 µm)
Adhesive thickness	0.0025 inch (65 µm)
Elongation at break	100 %
Shelf life	18 months from date of shipment when stored in original packaging at 72°F (22°C)

Commonly Used Sizes

Width	Length	Packaging
1 inch (2.54 cm)	72 yards (66 m)	48 rolls per case
2 inches (5.08 cm)	72 yards (66 m)	24 rolls per case

• Broken cases and other widths available on special order.

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2024-04-12

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.