Description

Securlon® vacuum bag films are multi-layer extruded films providing multiple layers of safety. These layers reduce the concerns for ''pinholes'', weak spots, brittleness and inconsistency in films. It is strong, has a high elongation capability. Securlon® vacuum bag film is the most secure nylon film made for high value laminate constructions. Securlon® L-1000 has temperature resistance up to 204°C (400°F), Securlon® L-2000 has temperature resistance up to 218°C (425°F).

Benefits

• Reduce scrap risk with multi-layered vacuum security against defects.

• Part quality and consistency improves with better pressure application.

• Super strength and reliable multi-layer construction reduces bag failure costs, safeguarding expensive parts.

Technical data

	Securlon® L-1000	Securlon® L-2000	Test method
Material type	Nylon, multi-layer	Nylon, multi-layer
Elongation at break	500 %	450 %	ASTM D 882
Tensile strength	82 MPa (12000 psi)	62 MPa (9000 psi)	ASTM D 882
Maximum use temperature	204°C (400°F)	218°C (425°F)
Flammability (self extinguishing)	Yes	Yes	ATP-5034
Materials to avoid	Phenolic resins / Strong oxidizers	Strong oxidizers
Colour	Purple	Blue
Storage	Recommended Storage temperature is 5°C to 40°C (41°F to 104°F)at no less than 25% relative humidity. Store indoors in original packaging, do not stack rolls on end.
Usage	Optimal usage conditions are in a Relative Humidity range from 50% to 60%rh. Nylon based vacuum bag films are sensitive to humidity, remaining soft at higher %rh and at risk of become stiffer in low %rh, see "Hydrate bagging films" TDS.

Sizes

	Thickness	Width	Forms Available*
Securlon® L-1000	50 µm (0.002 inch)	up to 7.11 m (280 inches)	SHT, CF, LFT
Securlon® L-2000	50 µm (0.002 inch)	up to 4.57 m (180 inches)	SHT, CF, LFT
	75 µm (0.003 inch)	up to 4.57 m (180 inches)	SHT, CF, LFT

• For more sizes, see the Sizes chart in this section.

• Custom shapes and sizes are available, please contact Airtech for more information.

Sustainability

Notes

• Securlon® L-2000 is available embossed for compaction applications.

• The maximum use temperature is dependent upon the duration at maximum temperature and is
process specific, Airtech recommends testing prior to use.

Last updated : 2025-02-05

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.