Description

Ipplon® DPT1000 & Ipplon® WN1500 are high temperature nylon films for cure temperatures up to 246°C (475°F). They can be used when high temperature and high pressure are required. They are the recommended materials for cures with phenolic resins.

Benefits

• Heat resistance provides vacuum security during high temperature cures.

• Good elongation helps avoid bridging in corners that can result in blown bags or resin richness.

• High strength and chemical resistance reduces bag failures with aggressive phenolic resins.

Technical data

	Ipplon® DPT1000	Ipplon® WN1500	Test method
Material type	Nylon	Nylon
Elongation at break	375 %	375 %	ASTM D 882
Tensile strength	62 MPa (9000 psi)	62 MPa (9000 psi)	ASTM D 882
Maximum use temperature	246°C (475°F)	246°C (475°F)
Flammability (self extinguishing)	Yes	Yes	ATP-5034
Materials to avoid	Strong oxidizers	Strong oxidizers
Colour	Orange	Blue
Storage	Recommended Storage temperature is 5°C to 40°C (41°F to 104°F)at no less than 25% relative humidity. Store indoors in original packaging, do not stack rolls on end.
Usage	Optimal usage conditions are in a Relative Humidity range from 50% to 60%rh. Nylon based vacuum bag films are sensitive to humidity, remaining soft at higher %rh and at risk of become stiffer in low %rh, see "Hydrate bagging films" TDS.

Sizes

	Thickness	Width	Forms Available*
Ipplon® DPT1000	50 µm (0.002 inch)	up to 4.57 m (180 inches)	SHT, CF, LFT
	75 µm (0.003 inch)	up to 4.57 m (180 inches)	SHT, CF, LFT
Ipplon® WN1500	50 µm (0.002 inch)	up to 4.57 m (180 inches)	SHT, CF, LFT
	75 µm (0.003 inch)	up to 4.57 m (180 inches)	SHT, CF, LFT

• For more sizes, see the Sizes chart in this section.
• Custom shapes and sizes are available, please contact Airtech for more information.

Sustainability

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2025-02-05

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.