Description

Our Econo range of peel plies are high quality but inexpensive and developed for applications such as resin infusion and hand lay-up. Econo peel plies assist or eliminate the need for sanding or abrading composite laminate. Econoply E is a heavy weight, heat set and scoured polyester peel ply developed for use in difficult environments and where a more textured surface is required for secondary bonding. Econoply J is a light weight, heat set and scoured polyester peel ply with a tight weave and good drapability.

Benefits

• Peel plies strip off cured laminates leaving a textured surface, reducing time spent hand finishing.

• Lower cost fabric reduces overall cost of vacuum bag process materials.

• Heavy duty version is stronger to resist tearing in tougher applications.

Technical data

	Econoply E	Econoply J
Maximum use temperature	149°C (300°F)	121°C (250°F)
Fibre type	Polyester	Polyester
Weight	95 g/m² (2.8 oz/yd²)	54 g/m² (1.6 oz/yd²)
Thickness	0.152 mm (0.006 inch)	0.076 mm (0.003 inch)
Colour	White	White
Extractables	<0.5 % by weight	<0.5 % by weight
Storage	Recommended storage temperature is 5°C to 40°C (41°F to 104°F). Store indoors in original packaging, do not stack rolls on end.

Sizes

	Width	Length	Packaging
Econoply E	152 cm (60 inches)	229 m (250 yards)	1 roll
Econoply J	152 cm (60 inches)	91 m (100 yards)	1 roll

Sustainability

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process

specific, Airtech recommends testing prior to use.

• Hot knife (sealed edge) slitting upon request with 1 roll as minimum order quantity.

Last updated : 2025-03-26

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.