Description

Airdraw 2 vacuum bagging film is embossed with a ''cracked ice'' pattern which allows for rapid air removal when placed under vacuum. The film has been formulated to provide increased stiffness to assist in maintaining a breathable pattern.

Airdraw 2 is designed for ply compaction with the added benefits of not requiring a breather. It is embossed from one side of the film, under close examination; the film has a flat side and a raised side. The outer surface of the roll is the raised side. For best results, place the raised side against the part surface on top of a perforated release film.

Benefits

• Embossed pattern provides network of air passageways, eliminating need for separate layer of breather.
• Improved stiffer formula keeps air path open resulting in better vacuum levels, faster.
• Wide width makes compacting large parts even faster with no seams required.

Technical data

		Test method
Material type	Polyamide compound
Elongation at break	450 %	ASTM D 882
Tensile strength	55 MPa (8000 psi)	ASTM D 882
Maximum use temperature	121°C (250°F)
Flammability (self extinguishing)	Yes	ATP-5034
Materials to avoid	Phenolic resins/Strong oxidizers
Colour	Pink
Storage	Recommended Storage temperature is 5°C to 40°C (41°F to 104°F)at no less than 25% relative humidity. Store indoors in original packaging, do not stack rolls on end.
Usage	Optimal usage conditions are in a Relative Humidity range from 50% to 60%rh. Nylon based vacuum bag films are sensitive to humidity, remaining soft at higher %rh and at risk of become stiffer in low %rh, see "Hydrate bagging films" TDS.

Sizes

Thickness	Width	Length	Weight/Roll	Forms Available^*
75 µm (0.003 inch)	1.52 m (60 inches)	198 m (650 feet)	27 kg (60 lbs)	SHT
75 µm (0.003 inch)	3.05 m (120 inches)	198 m (650 feet)	54 kg (119 lbs)	SHT
75 µm (0.003 inch)	3.81 m (150 inches)	198 m (650 feet)	70.6 kg (156 lbs)	SHT

• Custom shapes and sizes are available, please contact Airtech for more information.
* SHT = sheeting

Sustainability

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
• Watch a demo video of Airdraw 2 in the "Media Centre" on our website.

Last updated : 2025-02-05

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.