Description

Ipplon® DP1000 & Ipplon® KM1300 are vacuum bagging films with a high elongation and are suitable for cure temperatures up to 212°C (414°F). They are recommended for bagging applications where a higher softness is required.

Benefits

• Softness and high elongation make bagging easier and faster to complete, reducing labour cost.

• Wider film means less seams for safer high temperature cures of large parts in shorter cycle times.

• High elongation reduces bridging and rework due to resin rich corners.

Technical data

	Ipplon® DP1000	Ipplon® KM1300	Test method
Material type	Nylon	Nylon
Elongation at break	450 %	450 %	ASTM D 882
Tensile strength	48 MPa (7000 psi)	48 MPa (7000 psi)	ASTM D 882
Maximum use temperature	212°C (414°F)	212°C (414°F)
Flammability (self extinguishing)	Yes	Yes	ATP-5034
Materials to avoid	Phenolic resins / Strong oxidizers	Phenolic resins / Strong oxidizers
Colour	Salmon pink	Pink
Storage	Recommended Storage temperature is 5°C to 40°C (41°F to 104°F)at no less than 25% relative humidity. Store indoors in original packaging, do not stack rolls on end.
Usage	Optimal usage conditions are in a Relative Humidity range from 50% to 60%rh. Nylon based vacuum bag films are sensitive to humidity, remaining soft at higher %rh and at risk of become stiffer in low %rh, see "Hydrate bagging films" TDS.

Sizes

	Thickness	Width	Forms Available*
Ipplon® DP1000	50 µm (0.002 inch)	up to 9.00 m (354 inches)	SHT, CF, LFT
	75 µm (0.003 inch)	up to 9.00 m (354 inches)	SHT, CF, LFT
Ipplon® KM1300	50 µm (0.002 inch)	up to 9.00 m (354 inches)	SHT, CF, LFT, GT, G
	75 µm (0.003 inch)	up to 9.00 m (354 inches)	SHT, CF, LFT, GT, G

• For more sizes, see the Sizes chart in this section.
• Custom shapes and sizes are available, please contact Airtech for more information.

Sustainability

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2025-02-05

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.