Description

A241MFD is a multi-layer fibreglass vac valve pad with a wire mesh to prevent airflow seal off.

A22C vac valve pad is a multi-layer fibreglass construction to prevent seal off and resin flow into the vacuum connectors.

Benefits

• Avoid part defects due to breather crush and lost vacuum.
• Protect from bag failures under valves and lost bags.
• Prevent tool damage under the vac valve.

Sizes

Thickness	Width	Length
6,35 mm (0,25 inch)	5,08 cm (2 inches)	5,08 cm (2 inches)
6,35 mm (0,25 inch)	7,62 cm (3 inches)	7,62 cm (3 inches)
6,35 mm (0,25 inch)	10,16 cm (4 inches)	10,16 cm (4 inches)

Last updated : 2016-02-15

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.