Description

Tool Valve 125 & 150 are machined stainless steel valves that are inserted through the mould. They have a high temperature silicone seal that will operate to 260°C (500°F). Tool Valve 125 & 150 are designed to work with our Airflow 60R, Airflow 65R and Airflow 800.

Benefits

• Flattened head with no sharp edges.

• Good sealing because of the maximized sealing surface.

• Simple design that allows the vacuum hose to be screwed directly into the Tool Valve.

• Easy installation.

Technical Data

	Tool Valve 125 & 150
Construction	5 pieces: Tool Valve, Hex Nut, Spring Washer, Washer, Gasket
Material type	Stainless steel
Material type of gasket	Silicone
Hose connections thread	1/4 inch female NPT
Assembly clamp thread	3/4 inch - 16 UNF male
Service temperature	260°C (500°F)

Sizes

Product Reference	Head Diameter	Rod Diameter	Part Length
Tool Valve 125	1.25"	0.75"	3"
Tool Valve 150	1.50"	0.75"	3"

Directions for Use

• Insert the Tool Valve (with the Gasket on) through the mould

• Put the Washer and Spring Washer on the rod

• Tighten the 3/4“ 16 Hex Nut by using machined flats

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2024-04-30

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.