Description

The Masterflex ''S'' Series is a flexible spiral square tube used as a reinforcing hat section stiffener on the backside of the tool face. Masterflex stiffens the tool face to avoid dimensional stability problems. This is achieved by overlaying our tooling prepreg or wet lay-up plies over the Masterflex. They are constructed of spirally woven pre-stiffened carbon or fiberglass cloth and are easily conformable to the mold configuration.

Benefits

• Better quality parts off dimensionally stable tooling due to Masterflex stiffeners.
• Tooling free stiffener fabrication reduces cost and build time.
• Can be used with wet lay-up, infusion, or prepreg process.

Technical data

Material type	Fiberglass (F) or Graphite (G)

Sizes

Product Reference	Width	Height	Length
MSG22 / MSF22	2 inches (5.08 cm)	2 inches (5.08 cm)	4 feet (1.22 m)
MSG32 / MSF32	2 inches (5.08 cm)	3 inches (7.62 cm)	4 feet (1.22 m)
MSF42 / MSG42	2 inches (5.08 cm)	4 inches (10.16 cm)	4 feet (1.22 m)

Notes

• Other sizes available on special request. Minimum quantities may apply.
• Minimum order on stock sizes is 4 feet (1.22 m).

Last updated : 2019-12-13

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.