A7300 is a multi-layer release film which can take temperatures up to 500°F (260°C). All standard perforations are available. Please see our perforation table in this section.
| | Test method |
| Material type | ETFE, multi-layer | |
| Elongation at break | 375 % | ASTM D 882 |
| Tensile strength | 10000 psi (69 MPa) | ASTM D 882 |
| Maximum use temperature | 500°F (260°C) | |
| Materials to avoid | Compatible with most resin systems | |
| Colour | Blue/Yellow | |
Shelf life
| Unlimited when stored in original packaging at 72°F (22°C)
| |
| Thickness | Width | Length | Weight / Roll | Forms Available* |
|---|
| 0.001 inch (25 µm) | 60 inches (1.52 m) | 1750 feet (533 m) | 66 lbs (30 kg) | SHT |
• Custom shapes and sizes are available, please contact Airtech for more information.
* SHT = sheeting
• Maximum use temperature is dependent upon the duration at maximum temperature and is process
specific. Airtech recommends testing prior to use.
Last updated : 2016-04-12
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
