Description

Airpad Dam is an uncured, non-silicone rubber with an adhesive backing. Airpad Dam is designed to dam resins in all types of layups. Airpad Dam is silicone free.

Benefits

• Maintains edge of laminate thickness, avoiding thinning.

• Controls resin bleed out from laminate edge.

• Thin construction allows for more precise control of edge dam height.

Technical data

Material type	Non-silicone rubber
Adhesive material	Acrylic
Colour	Black
Maximum use temperature	204°C (400°F)
Shelf life	24 months from date of shipment when stored in original packaging at 22°C (72°F)

Sizes

Thickness	Width	Length
1.59 mm (0.0625 inch)	25.4 mm (1 inch)	15.24 m (50 feet)

Notes

• If release is a problem, simply cover the inside of the dam with our PS tape Teflease MG2.

The Teflease MG2 will form to the Airpad Dam.

• Teflease MG2 R can be used if a non-silicone adhesive is needed.

• The maximum use temperature is dependent upon the duration at maximum temperature and is process specific,

Airtech recommends testing prior to use.

Last updated : 2026-02-04

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.