Description

The Airtech Resin infusion connector with a flat base VAC-RIC LT provides inexpensive and efficient through bag connection for vacuum manifold and resin feed lines for low temperature resin infusion applications. It is suitable for use with the Dahlpac MC79 vacuum breather pad.

Benefits

• Saves time connecting poly tubing to vacuum bags.
• Avoid quality problems due to vacuum bag leakage at pipe connections.
• Simple design works for resin feeds and vacuum connections.

Technical data

Material type	PE
Maximum use temperature	176°F (80°C)
Colour	White

Sizes

Product reference	Tube connection	Spiral tube connection
VAC-RIC LT 12	1/2 inch (13 mm)	1/2 inch (13 mm)
VAC-RIC LT 58	5/8 inch (16 mm)	5/8 inch (16 mm)
VAC-RIC LT 34	3/4 inch (19 mm)	3/4 inch (19 mm)

Notes

• Select RIC to fit tube and spiral employed and position as desired, then complete vacuum bag.
• Cut polyethylene tube on angle and apply wrap of vacuum sealant tape above cut.
• Apply bag film over RIC and pierce film with angled tube until vacuum sealant seals connection.
• For any use with a spiral tube, it is recommended to use the 'RIC' with the channel through the connector
base.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2021-07-17

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.