Airtac 2C is a mist rubber based adhesive intended for use in layered composites assemblies. Airtac 2C has aggressive tack and the mist spray pattern ensures good coverage.
Airtac 2C holds fabrics and core materials in place prior to vacuum bagging for infusion.
• Excellent tack holds dry materials for faster vacuum bagging.
• More accurate material placement for infusion setups and better quality laminates.
• Environmentally compliant.
| Characteristics | Non-CFC and California Compliant |
| Colour | Cream |
| Shelf life | 12 months from date of shipment when stored between 59 - 95°F |
| VOC | <30% |
| Packaging Type | Content |
|---|
| 12 cans per case | 600 ml per can
|
• Shake well before use.
• Surfaces should dry and clean, dirt and grease free before application.
• Do not wet surface.
• Spray adhesive from 6-8” inches away onto the surface.
• Allow to dry for approximately 10 seconds until tacky and then press fabric or core material in position.
• To prevent the spray nozzle from blocking, at the end of each period of use, turn the can upside down
and press the nozzle until the spray is clear of adhesive.
• Consult SDS prior to use.
• Airtac 2C will typically dry within two minutes under normal conditions. High humidity and low
temperature will slow the drying time.
Last updated : 2023-08-08
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
