Description

Infusion valves and fittings are available in several diameters and they are designed to be connected with different types of tubes used to control resin flow in the vacuum infusion process. The fittings can also be used to join the spiral tubes used as vacuum channels.

Technical Data

Polypropylene fittings
Material type	Polypropylene
Maximum use temperature	90°C
Colour	Black
Polyacetal infusion valve
Material type	Polyacetal
Maximum use temperature	120°C
Colour	Black/Red

Sizes

Connector part numbers:

Tee	Elbow	Coupling	Infusion Valve
PTF12	PLF12	PCF12	Infuvalve 12
PTF16	PLF16	PCF16	Infuvalve 16
PTF20	PLF20	PCF20	Infuvalve 20

Fitting size (mm)	Works with:
12	10mm I.D. PE Tube 10mm I.D. PVC fibre reinforced tube 8mm I.D. Sil-tube
16	14mm I.D. PE Tube 13mm I.D. PVC fibre reinforced tube 10mm I.D. Sil-tube
20	19mm I.D. PVC spiral reinforced tube 18mm I.D. PE Tube

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
• Other sizes available upon request. Minimum order quantity may apply.
• See separate data sheets for tubes.

Last updated : 2023-10-17

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.