Description

The Resintrak is a knitted technical tape designed to be used during the resin infusion process as resin flow line. This product is composed of a very specific 100% polyester knitting which offers a very high resin permeability and will transport resin along the surface and into the part. The Resintrak leaves no mark off on the part when used in conjunction with Airtech's flow media and release ply.

Resintrak HF is a high flow rate resin feed line with lower resin waste for easier, more efficient infusions.

Benefits

• Easier to bag over than alternate flow lines.
• No mark off.
• Can easily be cut to size and is very convenient in use.

Technical data

	Resintrak	Resintrak HF
Material type	Knitted Polyester	Knitted Polyester
Maximum use temperature	190°C	190°C
Colour	White	White
Resin flow	Standard flow	High flow

Sizes

Product	Thickness	Width	Length
Resintrak	3 mm	43 mm	25 m
Resintrak HF	4 mm	30 mm	25 m

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2023-07-20

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.