Description

Various infusion tube fittings are available to connect tubes and valves to control resin flow.

Technical Data

Nylon fittings
Material type	Nylon
Maximum use temperature	356°F (180°C)
Colour	Translucent

Infusion valve
Material type	Polypropylene
Maximum use temperature	248°F (120°C)
Colour	Black

Sizes

Connector Type	Part Name	Works with:
Nylon barb "T" fitting	NTF3/8	3/8" I.D. tubing
	NTF1/2	1/2" I.D. tubing
	NTF5/8	5/8" I.D. tubing
Nylon barb "Elbow" fittings	NEF3/8	3/8" I.D. tubing
	NEF1/2	1/2" I.D. tubing
	NEF5/8	5/8" I.D. tubing
Nylon barb "Coupling" fittings	NCF3/8	3/8" I.D. tubing
	NCF1/2	1/2" I.D. tubing
	NCF5/8	5/8" I.D. tubing
Infusion Valve	Infusion Valve 1/2	3/8" I.D. tubing
	Infusion Valve 5/8	1/2" I.D. tubing

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2023-10-17

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.