Description

PE tube is a low temperature tube designed to transport resin during infusion. PE spiral tube can be used to create a vacuum manifold around the perimeter of a part during infusion.

Technical Data

Material type	Polyethylene
Colour	Transparent
Maximum use temperature	250°F (121°C)

Sizes

PE Tubing

Part Name	Outer Diameter (O.D.)	Internal Diameter (I.D.)	Length
PT1/2	1/2"	3/8"	330 feet
PT5/8	5/8"	1/2"	330 feet
PT3/4	3/4"	5/8"	330 feet

PE Spiral

Part Name	Outer Diameter (O.D.)	Internal Diameter (I.D.)	Length
PSW3/8	3/8"	1/4"	330 feet
PSW1/2	1/2"	3/8"	330 feet
PSW5/8	5/8"	1/2"	330 feet
PSW3/4	3/4"	5/8"	330 feet

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
• See Resin Infusion Connectors technical data sheet for compatible fittings.
• Example: 3/8" I.D. PE Tube works with NEF 38.

Last updated : 2023-07-20

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.