Description

Airtech Resinflow 20 is a bi-planar mesh.

Benefits

• Suitable for debulking without the requirement of a release film.
• Widely used as an infusion mesh.

Technical data

Material type	Polypropylene
Maximum use temperature	100°C
Approximate weight	180 g/m²
Configuration of net	Extruded
Nominal thickness	1.2 mm
Colour	Clear
Shelf life	Unlimited when stored in original packaging at 22°C

Sizes

Thickness	Width	Length
1.2 mm	1.0 m	100 m rolls

Notes

• This product does not fray when cut or roll up at the ends.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2021-04-21

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.